![]()  | 
	
| 
		 
			 
			#1  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			does anyone know where i can order cargo netting? 
		
		
		
		
		
		
			i want to try to use it on the ceiling of the cuddy for lifejacket storage. since i have to remove the trim wood on the hatch to re-finish it anyway,i thought i could use large stainless washers on the mounting nuts when i re-install them to hold it in place.after that i just have to figure out how to install the netting on the outer sides of the cuddy. thanks! 
				__________________ 
		
		
		
		
		
	
	1983 steplift w/ a 1983 evinrude 200hp  | 
| 
		 
			 
			#2  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			might try an automotive junk yard. several suv's & vans used a piece in the back for cargo restraint.
		 
		
		
		
		
		
		
		
		
	
	 | 
| 
		 
			 
			#3  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			http://www.mcmaster.com/#cargo-nets/=audtg3 
		
		
		
		
		
		
			I buy everything I can through these guys...we use them at work all the time. They have EVERYTHING. 
				__________________ 
		
		
		
		
		
	
	1986 V-20 1986 Yamaha 150 HP  | 
| 
		 
			 
			#4  
			
			
			
			
			
		 
		
	 | 
|||
		
		
  | 
|||
| 
		
	
		
		
			
			 
			
			We had the same thing in our 285 mako and it worked great. I found you a website that has nets made for boats. Might cost a little more but they look like the nets are very strong and should last a long time..  
		
		
		
		
		
		
		
		
	
	Mike Z. http://www.rigritemfg.com/cargo.shtml  | 
| 
		 
			 
			#5  
			
			
			
			
			
		 
		
	 | 
||||
		
		
  | 
||||
| 
		
	
		
		
			
			 
			
			it's really the one thing that i wish was different about my boat.not quite enough storage.so,i figured since i doubt i'll use the cuddy for anything but storage i might as well make it as useful as possible.plus,the netting will allow the lifejackets to air dry too. 
		
		
		
		
		
		
			thanks guys! 
				__________________ 
		
		
		
		
		
	
	1983 steplift w/ a 1983 evinrude 200hp  | 
![]()  | 
	
	
| Thread Tools | |
| Display Modes | |
		
  | 
	
		
  |