Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Off Topic

Reply
 
Thread Tools Display Modes
  #1  
Unread 12-31-2010, 03:34 PM
spareparts's Avatar
spareparts spareparts is offline
God
 
Join Date: Oct 2006
Location: Raleigh, NC
Posts: 6,192
Default

late 90's Tahoe/Suburban, they'll get around 18 on the highway. Mid ninty's Cherokee, find a cream puff, they are out there. I get around 20 from mine driving like I stole it. Between dependability, ease and cost of repair, total cost of ownership, I don't think you will find anything to beat these two choices. I purposi[ly left out Ford products after my experiance with the 4.6 in my Van. Teh Ford modular motors are a PIA to work on and are expensive to repair. On the Jeep, check around high end neighbor hoods, when the Jeep was new, they were the yuppie choice of vehicle, a lot of people kept them as back up cars while the Bimmer was in the shop, I see one every once in a while that loks brand new.
Reply With Quote
  #2  
Unread 12-31-2010, 06:01 PM
Destroyer's Avatar
Destroyer Destroyer is offline
God
 
Join Date: Apr 2010
Location: Montville, NJ
Posts: 8,236
Default

Quote:
Originally Posted by spareparts View Post
late 90's Tahoe/Suburban, they'll get around 18 on the highway. Mid ninty's Cherokee, find a cream puff, they are out there. I get around 20 from mine driving like I stole it. Between dependability, ease and cost of repair, total cost of ownership, I don't think you will find anything to beat these two choices. I purposi[ly left out Ford products after my experiance with the 4.6 in my Van. Teh Ford modular motors are a PIA to work on and are expensive to repair. On the Jeep, check around high end neighbor hoods, when the Jeep was new, they were the yuppie choice of vehicle, a lot of people kept them as back up cars while the Bimmer was in the shop, I see one every once in a while that loks brand new.
Not a fan of Surburans, because of their terrible (to me) turn radius, but I gotta agree with you Spare that they're reliable. I got 20.6 MPG on my trip to Fla. with my Cherokee. The Cherokees a tad small Charlie, but it turns on a dime, is reliable as sh_t and is in the price bracket you're looking in. Try and get one that has antilock brakes. Mine doesn't have them and I think* that Tsubaki said he had one and it had antilock brakes? Look for a late 90's vehicle as they are the more "stylish" with the smooth tailgate and sides... IMHO. Oh and make sure it's injected. You should be able to pick up a cherry one for about $4500. Less for a well used one. Given the area we live in, go under the tail of the vehicle and look at the frame rail where it crosses the rear axle. I've seen several rust in that one spot. Other than that they seem to be pretty good with road salt.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer
1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer
1996 V21 w/1993 200HP Mercury on a Shoreline Trailer
All towed by a 5.7L Hemi Durango.


If God didn't have a purpose for us we wouldn't be here, so
Live simply, Love generously, Care deeply, Speak kindly.
(Leave the rest to God)

Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
Reply With Quote
  #3  
Unread 12-31-2010, 06:31 PM
THEFERMANATOR's Avatar
THEFERMANATOR THEFERMANATOR is offline
God
 
Join Date: Dec 2006
Location: Zephyrhills Fl
Posts: 7,206
Send a message via AIM to THEFERMANATOR
Default

A 96-99 TAHOE or YUKON with the 5.7L VORTEC V8 would be at the top of the list. The turning radius was poor on the 95 and older ones, but 96+ are MUCH better. A 91-95 CHEROKEE would be at the top of the list as well. 96 is when CHRYSLER started implementing alot of there so called upgrades and the downward slide started. ALL of the grand cherokees with a 4.0L have sorry trannies in them, and the differentials in them have proven troublesome over the years in the 4X4's. The small BLAZER isn't bad, but the 4.3L V-6 leaves alot to be desired as far as power goes after you've driven something with a 4.0L in it. One of the new style(99-04) grand's with the 4.7L V-8 has a good engine(if it is maintained properly), the trans in them is solid and lasts, but you are still stuck with the crappy diffs that CHRYSLER put under em that like to sing like crazy. The EXPLORER isn't bad, but I'm just not a FORD fan. And there are some decent imports out there, but I don't drive rice.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR

2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD

AND THE PINK JEEP!!!! R.I.P.
http://www.wellcraftv20.com/communit...ad.php?t=11664
Reply With Quote
  #4  
Unread 01-03-2011, 01:37 PM
Skools Out's Avatar
Skools Out Skools Out is offline
God
 
Join Date: Jul 2007
Location: Graham / Emerald Isle, NC
Posts: 5,926
Default

i've had 3 of those motors and they are good for 175 to 200 K miles then the rear main seals leak you just drop the pan replace the main bearings and the seals then it will go another 200 K tough motors if you ever rebuild one you should always make a stroker out of it with just changing the crank and rods to a 4.2 older 258 jeep motor. the 4.0 / 242 is one good motor.
__________________




1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:43 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.