|
|
#11
|
|||
|
|||
Here's a few more pics on what I've been up to since I put her in storage for the winter. Went to replace the center pannels on the rear access doors and when I took the screws out the whole thing fell apart. As you can see what a mess. I also built a stand for the kicker.
BC 
|
|
#12
12-22-2010, 05:58 AM
|
|||
|
|||
|
Put a new lower unit on this fall and decided to dress up the upper to make it match. I sanded it all down almost to bare metal, went to the local paint store and had them make up a couple of cans of epoxy primer and top coat. This is the primer I put on a couple of days ago. I'll let it cure for about a week then spray the gloss black finish coat. Just ordered new alpha one decals to put on when I'm finished. Should look like new,I hope!
BC
|
|
#13
12-22-2010, 08:14 AM
|
||||
|
||||
|
Awesome....
__________________
1986 V-20 1986 Yamaha 150 HP
|
|
#14
12-22-2010, 08:16 AM
|
||||
|
||||
|
Looking good, what kind of paint did you use?
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson  
|
|
#15
12-23-2010, 05:07 AM
|
|||
|
|||
|
The paint store in my area can mix any paint and put it in rattle cans for small jobs. I didn't feel like getting the spray gun out so I went that route. They have automotive,marine,anykind. This he told me is a marine epoxy, what brand I don't know, that alot of the local boat yards use. I'll let ya know how it holds up, but that might be awhile since the lake is about iced over.
BC
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
