|
|
#21
|
||||
|
||||
Quote:
Spanish, if you hang around here long enough you'll find that almost everyone here treats everyone else like family.. and I guess that's the magic of this place.. we ARE a family of boaters with a love for a particular type of hull. All opinions are respected, all advise is freely given, ...it's just a great place to hang.  (Special thanks to RWilson2526 for inviting me here in the first place. I owe you a lot Rob!)
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless. 
|
|
#22
09-06-2010, 01:50 PM
|
|||
|
|||
|
easy off
destroyer i completely agree with you this is one hell of a sight and im really starting to feel really comfortable in here i have learned alot from this forum and anything i can give back to it i will do it very gladly,Icouldnt wait to post these pics,realize that this is only the beginning of this project and i will be posting pics all the way through until I am finished.OK here are the pics(I AM NOWHERE NEAR FINISHED).Even where the bottom paint that is off i am still going to go over it again to get as much off as i possibly can(easy off).
Last edited by spanishmak; 09-06-2010 at 03:39 PM.
|
|
#23
09-06-2010, 01:55 PM
|
|||
|
|||
|
|
#24
10-26-2010, 09:28 AM
|
|||
|
|||
|
soda or sand blast
Welp finally got bottom paint of hull stripped(easy off and sanding)and done.Now gettin ready to work on fish boxes and coolers.I will never buy a boat with bottom paint again!!!!
Last edited by spanishmak; 10-26-2010 at 09:30 AM. Reason: misspelled
|
|
#25
10-26-2010, 11:20 AM
|
|||
|
|||
|
looks nice!
May I ask approximately how many hours this took you, and how many cans of oven-cleaner were required? [EDIT] and did you neutralize the oven cleaner with anything (like baking soda for example), or just wash it off with water? Last edited by peiserma; 10-26-2010 at 12:38 PM.
|
|
#26
10-26-2010, 07:19 PM
|
||||
|
||||
|
Looking good Spanish... Well done!!!!
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God) Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|
|
#27
10-30-2010, 08:31 AM
|
|||
|
|||
|
soda or sand
It took about 10 cans of easy off but it did not take off the last layer of bottom paint I had to sand that off,but the easy off did save me alot of sanding.Did nothing but wash it off,it does not harm gelcoat
|
|
#28
10-30-2010, 08:35 AM
|
|||
|
|||
|
soda or sand
sorry about 15 hours
|
|
#29
10-31-2010, 03:04 PM
|
||||
|
||||
|
heres when they soda blasted the bottom of my boat in 2007 and it cost me 500.00
     Then came the barrier paint and the micron    new drain plug while I was at it.  new swim platform too.   new rub rail .with 5/8 rope  new boot stripe and graphics    oh the engine 07   new girl  thats all I have to say about that!!!!!
__________________
1987 Dual Console / 2007 200 hp E-Tec 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
