Just a little update and will post pic later tonight. Was re-cutting a hole the PO put in floor for another pump wanted to install a real hatch. When cutting could feel the inside stringers moving around was able to pull back the great looking glass work and it was just that looked like new to find what little wood was their. Pulled four feet out all the way to the transom. Good news well kind of the wood going forward is fine but you can move it left to right and yet the floor has no soft spots at all.I can not see any foam at all is this normal.
Now trying to decide to pull the top cap off again and then pull the whole floor cap off as well or just cut the floor out where needed and reinstall but again I did drill a 8in hole forward and had the same moment in the stringers the outer stringers are great 100%. And why are the center most stringers not glassed over top...Well fun Fun going to cut the floor out now just to see which way to go..
The wife's saying sell it and that maybe an option but more the likely not..
|
09-26-2010, 01:12 PM
Threaded Mode