|
|
#1
|
||||
|
||||
FishBones Up to Speed
Well wanted to reach out to Skools and especially Ferm for their help in sorting out my prop set up for my 2250 Vector.
The final results came in today with a fully fueled (115 gallons) three large fellows, ice bait tackle etc. etc. Fully loaded 42.5 mph top speed Fully loaded max rpm 5500 with 15 by 17 stainless prop Holds plane at 3400 rpm at 21-23 mph fully loaded Cruises nicest at 3800-3900 rpm at 28 mph.fully loaded. Hole shot a little slower fully loaded but just fine, especially compared to some other boats I have been on. Thanks Ferm for your advise, now find me that 225 carb set for my 200 and I will be in like Flint Also if you guys need a prop and don't have a local set up call the Prop Gods, ask for Ken the owner. Top notch fellow and will take his time and help set you up, and if it is run with a prop he knows it.
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW Last edited by willy; 09-12-2010 at 05:14 PM. 
|
|
#3
09-12-2010, 05:43 PM
|
||||
|
||||
|
how about a video
 dont stop the vid short tho
__________________
1987 Dual Console / 2007 200 hp E-Tec 
|
|
#4
09-12-2010, 05:56 PM
|
||||
|
||||
|
Lol
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
|
#5
09-12-2010, 06:02 PM
|
||||
|
||||
|
Good to hear glad you got that thing where you want
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson  
|
|
#6
09-12-2010, 07:02 PM
|
||||
|
||||
|
You could always send that prop back to Ken and have him put some vent holes in it to improve the holeshot. Glad to hear it works well loaded down.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD  AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 
|
|
#7
09-12-2010, 07:20 PM
|
||||
|
||||
|
It did so good today in really snotty conditions Ferm I am never going to touch that baby. We came back in heavy rain and 2.5 to 3.5 footers. I put that bow down just a little and because it now holds plane at such low speed we came in without a single drop from the sea on board and a nice soft ride.
If you or Todd get me that 225 carb set I will pick up a couple hundred rpm and it will be an ideal set up for me. The other thing is that I had her loaded real heavy, I never run with a full tank on that thing because it is such a big tank and I can do a normal day of fishing at least twice if not more with less than half a tank. With that half a tank that motor / prop combo launches that 6000 lbs.+ boat out of the water. Anyhow thanks for the time on the phone brother, I enjoyed the conversations and the wisdom.
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
|
#8
09-15-2010, 02:37 PM
|
||||
|
||||
|
Congrats on getting your prop right Willy! I know you are happy.
__________________
 1994 Wellcraft V21
|
|
#9
09-15-2010, 05:01 PM
|
||||
|
||||
|
Yes I am Shane, come on up and we will test her out brother
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
