|
|
|
|
#2
04-16-2011, 11:10 PM
|
||||
|
||||
Here are the pictures with the boat on the trailer--I will try and get some this week when I head out fishing and have the boat off. Questions are welcome of course.
Sorry it took so long.
__________________
 88 V-20200 G2 
|
|
#3
04-17-2011, 06:45 AM
|
||||
|
||||
|
What is down the center (keel) when you first pull her up, what is helping to center the boat? I saw one keel pad in the pics but it looked low.
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
|
#4
04-17-2011, 10:22 AM
|
||||
|
||||
All I can say is WOW!!...I fully expected to see ALL the roller brackets gone, replaced entirely by bunKs and a couple of rollers for centering and beam protection...the flat bunks running front to back of all the brackets is a real stroke of genius!!...
 talk about SUPPORT!!...and easy to see why she centers so well loading...did you see that done or is that all your idea?...either way...GREAT!!... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#5
04-17-2011, 11:09 AM
|
|||
|
|||
|
yes sir, its a good thing i saved my rollers. now i have two options. looking at the pics is a huge help. MANY THANKS on that one.
|
|
#6
04-17-2011, 07:13 PM
|
||||
|
||||
|
The keel rollers on there are ones that were previously on there with the rollers--I just did not remove them---the boat gets nowhere near them--so not needed--The 4 boards are measured as to slide it in place off of the bottom (chines)of the boat.
The idea to use the roller brackets was mine---I took measurements and built it--then went down and loaded the boat out of the lake---brought her home and jacked up the boat in place, then moved the boards into place to make them tight on the chines---1/2 to 3/4" clearence. The boards are allowed to swivel by being on the roller assemblies bothfront back for them to conform to the hull front to rear and pivot center to outside to conform to the V shape--- I put the trailer about 6 inches in front of the fenders underwater and drive her on--centers automatically about 3/4 of the way on---then pull her out and crank in about 4 inches as the bunks level out when you stop floating the boat---has worked spot on everytime since I got her done last year. Cost estimate--under $100 Time--about 6 hours Glad you guys like it---I will get pictures with the boat off this coming week when I am out fishing off the coast---Ling Cod and Sea Bass!!
__________________
88 V-20200 G2 Last edited by Genie Aye; 04-17-2011 at 07:15 PM. Reason: add on
|
|
#7
04-20-2011, 06:02 PM
|
|||
|
|||
|
I am in need of replacing my keel roller, it is tearing up the keel big time. You can see the pic of it in my profile where the roller sits at. I put that there to replace a broken pvc centering... thing. We thought it would be a good idea to replace it with a keel roller. It turned out to be a not so good idea. I like the bunk boards for the keel that tsubaki has on his boat, i just need to see them better or even find out who makes them.
One place wanted me to use a swiveling bunk board bracket to fit on there, but didnt say how I would attach it at or if I can angle it to fit the keel. Any Ideas?
|
|
#8
04-20-2011, 07:48 PM
|
||||
|
||||
|
Quote:
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
