Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs

Reply
 
Thread Tools Display Modes
  #1  
Unread 05-28-2010, 08:57 PM
BRIELLY BRIELLY is offline
Senior Member
 
Join Date: Apr 2008
Location: Toms River, NJ
Posts: 155
Default

The floats were perfect. I took the fuel pump off and squeezed the bulb and got no gas out of the back. I even took it apart and checked but everything was good.
Reply With Quote
  #2  
Unread 05-29-2010, 07:23 AM
captpete13's Avatar
captpete13 captpete13 is offline
Senior Member
 
Join Date: Jul 2009
Location: toms river nj
Posts: 782
Default

maybe you have a coil or spark plug dropping out. you can pull 1 spark plug wire at a time to see if the surging goes away. Is it only at idle that you have this problem?
Reply With Quote
  #3  
Unread 05-29-2010, 08:52 AM
BRIELLY BRIELLY is offline
Senior Member
 
Join Date: Apr 2008
Location: Toms River, NJ
Posts: 155
Default

I didn't take the boat out but it seems to smooth out when I rev it up. When i used the spark checker I didn't notice the spark stopping on any of the cylinders. I'll try pulling off the wires to see what happens today.

Last edited by BRIELLY; 05-29-2010 at 09:05 AM.
Reply With Quote
  #4  
Unread 05-29-2010, 01:10 PM
BRIELLY BRIELLY is offline
Senior Member
 
Join Date: Apr 2008
Location: Toms River, NJ
Posts: 155
Default

I changed the plugs and checked compression today. Its an even 105-110 on all cylinders. Its weird becuase it will idle perfect for a minute and then all of a sudden surge up in rpm's and blow out quite a bit of smoke.
Reply With Quote
  #5  
Unread 06-01-2010, 08:23 PM
captpete13's Avatar
captpete13 captpete13 is offline
Senior Member
 
Join Date: Jul 2009
Location: toms river nj
Posts: 782
Default

have you had any luck? I've been towing non stop all weekend. Maybe I could take a look at it for you. It would only cost you a couple cold ones
Reply With Quote
  #6  
Unread 06-01-2010, 09:49 PM
BRIELLY BRIELLY is offline
Senior Member
 
Join Date: Apr 2008
Location: Toms River, NJ
Posts: 155
Default

Cold ones are in the fridge waitin for ya. At this point I can't tell if its a problem with the linkage or possibly something ignition related. I had it running steady at 600 rmps but when I try to adjust the idle it barely responds. Then it will all of a sudden shoot up to 1500 rpms and stay there until I fool with the idle adjustment. I did have the throttle and shift cables off when I redid the transom so possibly something is out of adjustment. If you can help me out that would be great just pm me your contact info. I do have it scheduled to go to Fullers for repair on Saturday so I'm not sure if that gives you enough time to take a look.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:38 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.