|
|
|
|
#1
|
||||
|
||||
Nice work Guys!!...I've been camped out in mine doin the same thing...I LMAO at that old wire bundle cause I got one just like it!!...jerked it ALL OUT!!...already been thru one stick of 1/4" heat-shrink and about to cut into a second...oh well...the sto's got mo!!...LOL!!...
Hopefully my Blue Seas Glass Fuse Block will last a little longer than your switches...thanks for the heads up... Is that orange wire on left w/in-line fuse Bennet trim tabs?...looks like mine... Great set-up, MJ & Tim!!... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#2
04-23-2010, 06:21 PM
|
||||
|
||||
|
If you look at the 5th pic the trim tab switch is tyhere, and yes they have a inline fuse. BS put a 15 in it and we blew it at sea the other day, But I had more on board and replaced with a 30 now no more issues.
I have a Blue Seas fuse panel in the electronics box for the Radar, and Spreader lights, hope that stays well? I have to get a few more pics also to post. I also did not go the heat shrink root because in my eyes its just another way to let moister in and then it has a hard time drying. I used Liquid Electric Tape instead, I put 2 coats on all and that seals it all tight. Thats just my way, I am sure you be fine.
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#3
04-23-2010, 08:21 PM
|
||||
|
||||
|
You are right about heat shrink...it leaves gaps, particularly at the ring...won't close down tight...I don't wanna change in mid-stream...and the HS is a step up from what I did in the 74...crimp and go there...and in 11 years never had a failure...but then she didn't see as much salty stuff as you guys do up there...that sh!t's ROUGH on stuff!!...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
|
#4
04-24-2010, 09:10 AM
|
||||
|
||||
|
The temp gague malfunctioned the other day while out running the river. After jiggling the wires,..it works.
Rewiring behind the panel of my '77 V-20 Cuddy on the to-do list.
__________________
Doug aka "Hammerhead" Jensen Beach, Florida '77 V-20 165 I/O
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
