![]() |
|
|
|
#1
|
||||
|
||||
|
welcome to the site!
What are you running for a prop?? The foils work nice for out of the hole, but you should be able to get on plane with out one. As for the steering, pull the cable out of the motor and clean it up, regrease it, and see if that helps. Gets pretty nasty back there if not cleaned regularly. Then you can start looking at other things if not fixed. On some V20's you will need to unbolt the motor to get the cable out. just slide the motor to one side a bit.
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#2
|
|||
|
|||
|
Thank you. I' ll work on it this weekend.
__________________
Wellcraft V20 - CC
|
|
#3
|
|||
|
|||
|
With the steering cable for my I/O cuddy I have had to turn the wheel to expose as much cable as possible, clean up the exposed cable, grease it, then turn in opposite direction to pull exposed cable in and then repeat the process over and over again until the exposed cable comes out with pretty clean grease on it.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|