|
|
|
|
#1
|
||||
|
||||
Tether the stern to a solid anchor point. Pull the trailer out with your tow vehicle about two foot. Block the stern up and pull the trailer out about 3/4 of the way. Now jack it off the trailer and block it and pull your trailer on out.
__________________
1983 V-20 capsized. . . . in the garage. 
|
|
#2
12-31-2012, 03:47 PM
|
||||
|
||||
|
Go back to my thread when I replaced my inbd. I have truss's and what I did was put a 2x4 on either side of the bottom (horizontial) part of the truss and then put a vertical brace on either side of the boat from the floor to the bottom of the truss, lifted my 350 out with no trouble and I bet it would have lifted the boat eng and all.
Do a search under me or "repowering" I have pics of the whole thing and some close up of my bracing.
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson  
Last edited by garagenc; 12-31-2012 at 04:11 PM.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
