|
|
|
|
#1
|
||||
|
||||
bump
__________________
 1978 V20 Cuddy w/ 225 Johnson. And Several other boat's 
|
|
#2
03-09-2010, 10:41 AM
|
||||
|
||||
|
What a thread. Goes back a ways, what you thinkin Skools?
|
|
#3
03-09-2010, 07:14 PM
|
||||
|
||||
|
This is all I got.
http://www.wellcraftv20.com/communit...ad.php?t=12543
__________________
 '75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny
|
|
#4
03-09-2010, 10:20 PM
|
||||
|
||||
|
oh just bumped it so a friend could find it. plus to read threw it again.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#5
03-10-2010, 10:02 AM
|
||||
|
||||
|
Very nice. 1983 20'CC
2.4L 200HP Merc- 48mph @ 6100RPM- 14.5x17pQuicksilver light load 2.4L 200HP Merc- 46mph @ 5800RPM- 15.5x17P Mirage light load 3.0L 250HP Merc-63mph @ 5800RPM- 15.5x23p Tempest light load 3.0L 250HP Merc- 55mph @ 5800rpm- 15.5X23P Tempest heavy load 3.0L 250HP Merc-58mph @ 5800RPM- 15.5x21p Thunderbolt heavy load 3.0L 250HP Merc- ??? @ ??? - 15.5x25P Tempest light Last try with a different prop, just as soon as I get my new lower unit  Then the fuel sippin 2.4 goes back on.
|
|
#6
03-10-2010, 10:25 AM
|
||||
|
||||
|
Same old question....
Here's tested props. Didn't have a 17 to test....
1985 Wellcraft v20 Fisherman CC Closed Transom with Stainless Marine Bracket Yamaha F150 Fuel topped off at 60 Gallons 2 batteries (unfortunately in the stern) Full 20 gallon in deck livewell (unfortunately in the stern) Boat is a tad bit *** heavy.... Prop RPM MPH GPH Mercury Vengeance 14.5 x 15 -5700- 36 - 14.2 Cruise - 4260 - 24.4 -8.7 4.5 seconds to plane Yami 3 blade SS Black (old) 13.5 x 19- 5600 - 36.2 -16 Cruise - 3800 - 25.4 - 10 6 seconds to plane Spoke with Power tech dude. He recommended a OFS3R15 3 blade 15 1/4 x 15 or a OFS4R14P (15 1/4 x 14) 4 blade. Anyone running these dimensions for a prop and what do you think? Thanks
__________________
http://i188.photobucket.com/albums/z...t/IMG_2009.jpg&&\"Ain't no shame in fishin' on the bottom.I came up with this at a bar real late. Last edited by whatknot; 03-10-2010 at 10:35 AM.
|
|
#7
03-22-2010, 09:44 PM
|
|||
|
|||
|
i have a 85' c.c. repowered with a 99' 225 efi merc... this has been a project just finally putting on the pieces together. first run with a 13"x21p mirage wot 5100rpm 53.5mph----4000rpm 40 mph......2nd run 13"x17 quicksilver 5800 rpm 50.5 mph----4000 33.5mph.... waiting till this weekend to try a buddies 19p wheel hope thats where i need to be
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
