Transom and floor repairs

[THEFERMANATOR]

Originally Posted by bacchus60

OK Via drill and chain saw I have got most of the rot out and now down to good wood (about a 14" semi circle all the way around the engine mount). Do I need to get all the little woods bits off the inner and outer skins. I am planning on using Quik Poly to saturate the wood that is left before I pour the Arjay. Any good tips? I will post link to pics tonight.

The ARJAY will have to bond to fibergalss, which means ALL of the wood has to come out. The ARJAY will not bond to wood from what I understand and it will fail if you don't get it all out.

[mauryc]

Bacchus, where are you located? That's a good Mardi Gras name you have there. I pured with Arjay but I got ALL the wood out per the manufacturer. Find my old post with pics, etc. Spend the extra time and get the inside of the transom clean.

Maury