Pivoting Cantilever Anchor Roller

[NOTHING ELSE MATTERS]

Had one on one of my boats, works really well, go the bigger you can.

[inaforty]

We put a bow roller on a previous boat (Parker 2120). However it wasn't a cantilever roller design. We had to fill in the hole where the nav lights were located and add separate red and green lights on each side of the bow roller. We had to extend the wiring to reach the new lights. We put a piece of 1/4 " aluminum for a backing plate. Notice the piece of cardboard with a string running through it in the very front of the bow. I had to do that to keep the filler material from dropping through the hole were the nav lights were. No way to get my hands up in there to hold it.