![]() |
|
|
|
#1
|
|||
|
|||
|
Another Pic.
|
|
#2
|
||||
|
||||
|
you need to raise your wench so that thw bow stop is above the bow eye. otherwise if you had to stop fast towing the boat will be in your back window of the tow car.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's |
|
#3
|
||||
|
||||
|
Nice vids...boat really looks like it is flying. Good luck with it.
__________________
1987 V20 1996 Jonhson 150 OceanRunner |
|
#4
|
|||
|
|||
|
I ran my 150 Merc with a 17" pitch four blade. Worked very well for my setup.
|
|
#5
|
||||
|
||||
|
Going to be a nice set up. the 150 is a perfect match for a V.
Please listen to what Todd said about your trailer set up, very dangerous what you got on the front winch set up in the pic.
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#6
|
|||
|
|||
|
I'll be reversing the location of the wench to be above the boy eye.
Thank you for catching that. I thought it was this way cause the strap strugles to go through the hole under the roller, but I'll figure it out. |
|
#7
|
||||
|
||||
|
Video no less.. I am jealous. The motor may be a tad low. It has a bit of funny spray on the port side when you plane out. Mine did the same thing, it turned out the bolt that holds the lower unit to the mid section was throwing the spray. Raised it up one hole and it was perfect.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|