Picked up today

[bksah2]

Did you find the foam to be wet

[NOTHING ELSE MATTERS]

No, it was not hard to remove at all. It had foam on te top portion of the perimeter so what i did was used a hack saw blade and cut it loose.
Foam was not wet.
Any body knows if the foam were using is it closed cell? (does not absorb water).

[NOTHING ELSE MATTERS]

I've been doing some work on the V lately, can't go full throtle, i've been busy with work. Anyway, besides changing all wires, removed live well(what a huge space under it), changing location of second battery(under the live well), also in the same location i installed the raw water washdown pump, battery charger and the second battery.
I remove part on the original console and made a new one to fit my gauges, switches and GPS.





Also painted the side rod holder boxes, they came out much better that expected.

[NOTHING ELSE MATTERS]

For some reason some of the pics i took today they came out.............. green? I don't know why.

[willy]

Nice work, the pics come out green cause you have to adjust your digital for fluorescent lighting.

[NOTHING ELSE MATTERS]

Originally Posted by willy

Nice work, the pics come out green cause you have to adjust your digital for fluorescent lighting.

I never had to before, besides, i took some pics outside with the same results ?????????

[willy]

fluorescents cause green, incandescents cause red. If you got green outside you might have had the setting wrong for daylight. I don't know but that is how photography works. also if you had red eye setting and flash with daylight it can cause odd happenings. You have to check the settings for the lighting you are using, especially with digital. If you leave it on auto sometimes it reads wrong and sets the lighting wrong.