Picked up today

[Skools Out]

hate to tell ya but if you didn't stop and kill that rust or prep those fenders with metal prep for fiberglassing 1) the rust will now rust it totally away inside the glass and 2) the glass will come loose and you will have a heck of a mess on the hwy when that happens. better off to buy 2 new fenders.

[NOTHING ELSE MATTERS]

Originally Posted by Skools Out

hate to tell ya but if you didn't stop and kill that rust or prep those fenders with metal prep for fiberglassing 1) the rust will now rust it totally away inside the glass and 2) the glass will come loose and you will have a heck of a mess on the hwy when that happens. better off to buy 2 new fenders.

All rust was removed with a grinder and also made holes on the fenders for the top and bottom layer of glass to bond together. I can't find fenders to fit at the local trailer part stores, i also called EZ Loader and gave me two dealers which they wanted 650 bucks for the set
What i will do is try and make a set out of that aluminum diamond plate but i have not got a price yet. I don't even know where to go and get them done.

[RWilson2526]

http://trailerpartsdepot.com/items.a...atus=0&Tp=&Bc=

found these guys have reasonable prices....not sure if they fit dimensionally but they look alot like yours.

[nipper]

What are the particulars on your Yamaha (i.e. year, hours, cost)?

[Skools Out]

um they sold aluminum tandem fenders at West Marine and Boaters World which is gone now for $89 each.

[tsubaki]

I'm with Skools on the fender stuff, it's a cancer, no stopping it.
Here is some in the raw for $46 plus shipping.
http://www.agrisupply.com/product.as...3854&sid=&eid=
Here is some aluminum stuff.
http://www.usatrailerpartscentral.co...pd-1562-0.aspx
Hows the transom?
D'you poke around in there looking for problems?

[NOTHING ELSE MATTERS]

Originally Posted by tsubaki

I'm with Skools on the fender stuff, it's a cancer, no stopping it.
Here is some in the raw for $46 plus shipping.
http://www.agrisupply.com/product.as...3854&sid=&eid=
Here is some aluminum stuff.
http://www.usatrailerpartscentral.co...pd-1562-0.aspx
Hows the transom?
D'you poke around in there looking for problems?

Thanks, i will check these guys too.

[NOTHING ELSE MATTERS]

Originally Posted by nipper

What are the particulars on your Yamaha (i.e. year, hours, cost)?

Is a 2000 with don't know how many hours(seller says less than 300), is a SX150 which is fuel injected. The guy, i know him, gave me the motor, controls, cables, digital tach,oil tank, s/s prop(have to check the size), he told me put it on the boat, try it and if i like it give him 2200 bucks. I think is a very good deal. What you guys think?

[csvencer]

Originally Posted by NOTHING ELSE MATTERS

Is a 2000 with don't know how many hours(seller says less than 300), is a SX150 which is fuel injected. The guy, i know him, gave me the motor, controls, cables, digital tach,oil tank, s/s prop(have to check the size), he told me put it on the boat, try it and if i like it give him 2200 bucks. I think is a very good deal. What you guys think?

If it runs, you just got a steal!

-Svence

[nipper]

I agree 100% that you got a steal. With the way the guy sold it to you (i.e. put it on and if you like it pay me), it will probably be a very good motor. Congratulations!