|
|
|
|
#1
|
||||
|
||||
Quote:
here's a link to where I posted them a few weeks ago.... man the rod holder almost got me....I checked and rechecked to make sure I was no where near steering cables/wires but forgot about the rod holders.. I cut the first hole and the rod holder was encroaching into the space by like 1/2" or less cutting across the top left hand corner. fortunately I cut the 4 corners of the fiberbglass out with a hole saw and I was able to push the hole saw in further and take a perfect crescent shaped piece out of the plastic tube of the rod holder, rods still fit in no problem. (if they were ss I would have been screwed. If I had only moved them back another 1/2" or so I would have had no problem...(turns out on the port side I did not have that problem as the rod holders are not installed identical on both sides (close but not exactly) Willy, I kind of half assed it, right now they are only screwed into the 1/4" or so fiberglass....my intention was to through bolt as I am pretty sure I can reach them from the aft hatches but I didnt have all the hardware and I had a nice supply of #10 screws. I had some free time yesterday (rare) so I just used sealant and screws. if they loosen up on me on I'll through bolt them with some nice fender washers or reinforce with some wood behind the hole.
__________________
1986 V-20 1986 Yamaha 150 HP 
|
|
#3
09-27-2009, 07:39 PM
|
||||
|
||||
|
Winner, winner, chicken dinner!!...2 pages and still climbin' on subject of cupholders...since 2003 I don't recall ever this in-depth discussion about cupholders...but no doubt these are the "specialest" featured yet
 Wall is 1/4" thick and you used #10 screws and sealant, they ain't goin' nowhere... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#4
09-29-2009, 08:40 PM
|
||||
|
||||
|
Quote:
__________________
1987 Dual Console / 2007 200 hp E-Tec 
|
|
#5
09-30-2009, 07:50 AM
|
||||
|
||||
|
i remember when the japanese car companies got in the mini van business in the 80's. they could not understand why a 7 passenger vehicle needed 12 cup holders. they are like electrical outlets, can you ever have too many.....
|
|
#6
09-30-2009, 01:34 PM
|
||||
|
||||
|
Quote:
Yeah and those beyatches will be sittin' around on their fat a$$es talkin' about the RWilson and what a nice PAIR he has!!...of cupholders that is
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
|
#7
09-30-2009, 01:41 PM
|
||||
|
||||
|
Sexy cupholders....I got wood.
__________________
 1994 Wellcraft V21
|
|
#8
10-01-2009, 07:01 AM
|
||||
|
||||
|
Check out the cup holders on this new 290 World Cat...
http://www.worldcat.com/community/ph...boatpage=290DC Now we know where he got 'em...must be a WC missing it's cupholders somewhere 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
