 
			
				08-29-2009, 08:11 PM
			
			
			
		  
	 | 
	
		
		
		
			  | 
			
				
				 God 
				
				
			 | 
			  | 
			
				
					Join Date: Mar 2007 
					Location: Savannah 
					
					
						Posts: 4,971
					 
					
					
					
					
					
				 
			 | 
		 
		 
		
	 | 
	
	
		
	
		
		
			
			
				 
				
			 
			 
			
		
		
		
			
			Just to clarify, stuff made by Permatex and Loctite was listed "not for use in contact with gasoline" or "to be used on metal only". 
This is the closest thing I can find that might be the correct sealant.
 
Any ideas?
 Gasoila Hard-Set Varnish Type Thread Sealant
  - Hard-setting, fast-drying, red varnish sealant
 
- Can be used on brass, copper, stainless steel, aluminum, black pipe, tin, galvanized pipe, cadmium-plated metal, rubber, porcelain, wood, marble, epoxies, cork, corpreme, asbestos, plexiglass, PVC and ABS plastic, paper, felt, and more
 
- Excellent resistance to all aliphatic, aromatic, chlorinated solvents; naphthas, benzenes, all petroleum products, refrigerants, freons, propane, butane, kerosene, jet fuel, water, steam and more
 
- NOT recommended for alcohol or oxygen
 
- Temperature Range: -60°F to 350°F (-52°C to 178°C) (up to 550°F (290°C) intermittently)
 
- Pressure Range: To 500 psi sealing face or butt joints; to 15,000 psi for threaded connections
 
- Dries to touch within 30 minutes; thorough drying may take 24 to 48 hours
 
   
		 
		
		
		
		
		
		
			
				__________________ 
				 
'75 Cuddy with '00 Johnson Ocean Pro 150 horse
 
Benny
  
  
			 
		
		
		
		
		
	
	 |