![]() |
|
|
|
#1
|
||||
|
||||
|
BGAlone,
The SP 5101 or 02 are both great, and not expensive. There are other brands also good but SP I have installed many and they are simply a standard on quality and price. The 6db gain SP are all good. The more expensive ones have better looking finish and looks, but are electrically similar. S.P. normally come with the connector NOT installed, to allow you to easily route the thin coax via a small hole. Installing the COAX connector ( CB type PL-259 ) is NOT easy, you will need a GOOD and powerfull solder iron or gun, so the HAM radio guy idea is what you want, besides, they are ALL great and very friendly guys/gals. An 8' AM/FM is OK if you want more range, and that way you will match both sides and the boat will look even, that is what I have, but if you have strong local stations for FM, you won`t need a big AM/FM antenna. With my 8' FM antenna I can receive St. Thomas stations which play AWESOME Reggae music, from 40+ miles away, with a shorty one, that will not be possible for me.
__________________
Make the habit of radio-checking your VHF, and use it. Father God is too busy to come down to help you himself, He sends His Angels. They have no wings, They are just your true friends. |
|
#2
|
||||
|
||||
|
Am Fm antenna will not interfere because you can't TX on them. Remember every 3 DB of gain, you double your ERP {Effective Radiated Power} of your radio. Hams are always willing to help out, use The QRZ database to find someone . I case your wondering QRZ in the old amateur radio Q signal's that date back to Morse code days stands for "Who's calling me"
__________________
1974 Wellcraft V-20 Center Console 1999 Mercury 150 HP Bluewater 1975 Wellcraft V-17 1977 Evinrude 70 HP Restoration Thread http://forums.iboats.com/showthread.php?t=404584 Enfield Connecticut Civil War Veterans Graves and History Pages http://enfieldwargraves.smugmug.com My companion book I authored http://www.blurb.com/books/1137672 |
|
#3
|
||||
|
||||
|
ALL of the 2000CC's origanally had an antenna mount on the starboard side right up next to the fuel filler. This was standard equipment from HYDRA-SPORTS. As for the VHF and AM/FM, get one of the newer VHF's that has a radio built into it. I seen that they came out not too long back and use one antenna I believe and they simply switch to which one you want to use unless there is a DSC signal and then it automatically goes to VHF. Or you could simply hook your AM/FM radio up to your grab handle by the windshield and use that as your antenna. This is the same antenna arrangement that most boat builders use now in fiberglass boats.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD ![]() AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 |
|
#4
|
||||
|
||||
|
Quote:
![]()
__________________
1990 Hydrasports 2000cc Vector with 96 200HP Oceanrunner. Saved by grace alone, through faith alone, in Christ alone http://www.providencerpchurch.com/ |
|
#5
|
||||
|
||||
|
SOmebody has filled in the holes on it then because the antenna was standard equipment from HYDRA-SPORTS right on top of the gunwale by the fuel filler. Both of mine have the mount right on top there.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD ![]() AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 |
|
#6
|
||||
|
||||
|
Quote:
WRT the antenna mount, if there were holes that were filled in, they did a great job because there's no evidence at all that there were holes there. I'm not saying it's impossible, just that if it was done, it was done right.
__________________
1990 Hydrasports 2000cc Vector with 96 200HP Oceanrunner. Saved by grace alone, through faith alone, in Christ alone http://www.providencerpchurch.com/ |
|
#7
|
||||
|
||||
|
BGA...if you have to find a new place to mount your antenna (s), may I suggest...if it will fit there, mount it just outside where the Bimini's main rail mounts to the top of the gunwale...that way you are not ADDING a new obstruction point as you would if say it was mounted in front or behind the top.
Does your Bimini mount top of the gunwale or inside?...there may not be enough room for this if it is top mounted...good luck whatever route you decide to take...and of course PICTURES
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#8
|
||||
|
||||
|
Quote:
http://shakespeare-marine.com/connec...ck=pl-259-cp-g Do you think this will do the trick?
__________________
1990 Hydrasports 2000cc Vector with 96 200HP Oceanrunner. Saved by grace alone, through faith alone, in Christ alone http://www.providencerpchurch.com/ |
|
#9
|
||||
|
||||
|
That's the first time I seen those, they will do, put some coax sealant around where the coax enters the connector, so water/moisture will not get wicked in to the connector and cable and really screw up your SWR. Putting PL-259's on is not hard, a little practice and a OHM meter to make sure the braid is not shorted against the center conductor when your done soldering and your good to go.
__________________
1974 Wellcraft V-20 Center Console 1999 Mercury 150 HP Bluewater 1975 Wellcraft V-17 1977 Evinrude 70 HP Restoration Thread http://forums.iboats.com/showthread.php?t=404584 Enfield Connecticut Civil War Veterans Graves and History Pages http://enfieldwargraves.smugmug.com My companion book I authored http://www.blurb.com/books/1137672 Last edited by Blu_Lunch; 08-22-2009 at 02:26 PM. |
|
#10
|
||||
|
||||
|
SWEET!
Will do Blu. Thanks for all your help.
__________________
1990 Hydrasports 2000cc Vector with 96 200HP Oceanrunner. Saved by grace alone, through faith alone, in Christ alone http://www.providencerpchurch.com/ |
![]() |
| Thread Tools | |
| Display Modes | |
|
|