![]() |
|
|
|
#1
|
||||
|
||||
|
Best " year " for the V20
which ever one you have in your yard.............. |
|
#2
|
||||
|
||||
|
there ya go
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#3
|
||||
|
||||
|
All kidding aside fisherman, from what I can tell from my tiime involved with this website (albeit short, comparitvely speaking) there is pretty much every year represented here by members and I have never read or heard any distinctions of quality or significant design change from year to year (although raising the floor for the deck drains was a good one, and going from saddle tanks to a floor tank was a biggie way back when)
If you look at some of thre repairs sections with pics of floors cut out and such you can hardly tell what year boat you are looking at based upon the construction. Wellcraft pretty much built the same darn boat for 26 years.....really that is the draw to these boats, cant improve too much on a good design.
__________________
1986 V-20 1986 Yamaha 150 HP |
|
#4
|
||||
|
||||
|
Quote:
![]() Well said sir.
__________________
1994 Wellcraft V21 |
|
#5
|
|||
|
|||
|
Willy - thanks for the specifics .
Also seems that in terms of buying one of these, there are two options: 1. buy one that's had major transom and floor related work done. 2. buy one and plan to need to have it rebuilt. Since I have no interest in a major project, I'd prefer to find a beauty, already fixed and ready for the blue. Somewhat smaller fuel capacity though at 60 gallons ?
|
|
#6
|
||||
|
||||
|
Quote:
__________________
1986 V-20 1986 Yamaha 150 HP |
|
#7
|
||||
|
||||
|
That is true, also you will find late boats that have soft transoms and early boats that are as hard as a rock.
The way a boat was maintained over the years makes the biggest difference. Some boats have bolt holes that are rusting and the owner never sealed them, some installed engines and did not do a good job on the bolt holes etc. some installed electronics or transducers along with thru hulls and did not bed the parts correctly and allowed water to seep in over the years. If those boats are sealed up right, especially if they are a trailer or rack stored boat they will last indefinetly
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#8
|
||||
|
||||
|
They are like snowflakes...you can find a '75 that somebody took care of and have a great boat...or a '96 that was abused and neglected and have a POS...
Assuming a reasonable amount of care over the lifetime of a given "V" I'd be lookin' in the mid 80s to mid 90s...and starting from scratch, a full transom (sea-drive preferred), add a bracket and best 25 or 30" OB your budget can handle...150 hp minimum...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#9
|
|||
|
|||
I've had the old low profile deck design, and the later self-bailing higher profile deck design. The hull is the same, the ride is identical, but it seemed to me the lower deck design had a more solid ride. I attributed it to the deck design of the later hulls having more flex in the cap, not the hull. Both ride outstanding. |
|
#10
|
|||
|
|||
|
Wow, going to have to get a ride on one of these..........
Saw one out of Shark River Inlet, Belmar, NJ this past Sunday. Just a few miles out the inlet. Looked nice. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|