|
|
|
|
#1
|
||||
|
||||
Rub rail looks right on! I just have to measure it to be sure. Thanks Reelapeelin! Now I just have to determine who makes that fuel sending unit. Can't seem to find anything that looks remotely similar. I have to take a look to see if there is any fine print up on top of the sending unit. If I cannot find a direct replacement can anyone recommend a quality replacement?
|
|
#2
04-20-2009, 09:49 AM
|
||||
|
||||
|
Forgot to post the rubrail from Taco Marine. Here it is....
|
|
#3
04-20-2009, 10:27 AM
|
||||
|
||||
|
Quote:
I don't know what their minimum length is...you might have to buy long enough to do whole boat...which is just as good anyway...short pieces will probably show seams anyway... Anyway, glad that was it... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#4
04-20-2009, 07:31 PM
|
||||
|
||||
|
What gauge do you have? Id just replace it with a standard teleflex adjustable
|
|
#5
04-20-2009, 07:35 PM
|
||||
|
||||
|
Do you mean the variable resistor tube style ones that you cut and calibrate?
|
|
#6
04-20-2009, 08:17 PM
|
||||
|
||||
|
For the fuel sender, teleflex and (Marpac) have a good universal sender for @ 30.00 that works well if you follow the formula. I think the one that you posted is no longer available but it has been replaced with a newer style. Look up "wema" senders online and contact them. They will need to know the depth of your tank and they will send you a sender 1" less than the depth of your tank. with shipping you will probably be @ $50.00. Hope this helps.
__________________
1975 V-20 w/1996 225 Johnson
|
|
#7
04-20-2009, 08:36 PM
|
||||
|
||||
|
I will give these guys (wemausa) a call in the morning to make sure it will work with my oem guage. Thanks for all the help.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
