|
|
|
|
#1
|
||||
|
||||
I did not see any pots on top. Only number I found on it was the P/N shown in the photo. Brought it to a local marina and they had no idea. I just don't want to get a cheap replacement. I tried to check it with a DMM but it was alreasy dead.
|
|
#2
04-20-2009, 02:44 AM
|
||||
|
||||
|
Love those 21s and yours looks like a particularly nice one...
Is the cross-section of your rub rail like one of these?... http://www.jamestowndistributors.com...+Rail+Inserts# Hope one of these works for you and thanks for all the pics!!... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#3
04-20-2009, 09:41 AM
|
||||
|
||||
|
Rub rail looks right on! I just have to measure it to be sure. Thanks Reelapeelin! Now I just have to determine who makes that fuel sending unit. Can't seem to find anything that looks remotely similar. I have to take a look to see if there is any fine print up on top of the sending unit. If I cannot find a direct replacement can anyone recommend a quality replacement?
|
|
#4
04-20-2009, 09:49 AM
|
||||
|
||||
|
Forgot to post the rubrail from Taco Marine. Here it is....
|
|
#5
04-20-2009, 10:27 AM
|
||||
|
||||
|
Quote:
I don't know what their minimum length is...you might have to buy long enough to do whole boat...which is just as good anyway...short pieces will probably show seams anyway... Anyway, glad that was it... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
|
#6
04-20-2009, 07:31 PM
|
||||
|
||||
|
What gauge do you have? Id just replace it with a standard teleflex adjustable
|
|
#7
04-20-2009, 07:35 PM
|
||||
|
||||
|
Do you mean the variable resistor tube style ones that you cut and calibrate?
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
