|
|
|
|
#1
|
|||
|
|||
I havent had any luck finding a 16ft. sheet of plywood. I called a few boat builders around here and a few had heard of it but didnt know where to get any. I guess Ill go with 8ft. sheets of BC or marine grade plywood and scarf it together. I thought I would use West System epoxy to glue it all together along with replacing all the brass screws with new ones. Yall got any suggestions. Ill snap some pics when I get started.
__________________
 77 V20 cuddy with 170 I/O Mercruiser 72 16ft. Carolina w/a 25hp Evinrude 
|
|
#2
03-29-2009, 06:08 PM
|
||||
|
||||
|
Long shot, but If you have an old time lumber yard in your area, you might give them a try - some of those old guys are pretty well connected.
For the scarf joint - you thinking about a half lap or cutting on an angle? Just curious how other guys do this stuff.
__________________
 Scott, Portland, OR '85 V-20 I/O, Merc 170
|
|
#3
03-29-2009, 07:26 PM
|
||||
|
||||
|
__________________
 Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
