|
|
|
|
#2
03-20-2009, 06:09 PM
|
||||
|
||||
Welcome to the site...try to snap off a couple of pics of the Pro Line B4 she goes out the driveway...
Before and after pix of the V20'll be fun too... Sorry to hear about upcomin' surgery...here's hopin' it all goes well 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#5
03-22-2009, 07:04 AM
|
||||
|
||||
|
Welcome to the site. Good Luck with her, she looks good now. Billy Mac
__________________
 Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug
|
|
#6
03-22-2009, 10:12 AM
|
||||
|
||||
|
welcome aboard we like lots of pics
__________________
1987 Dual Console / 2007 200 hp E-Tec 
|
|
#7
03-28-2009, 06:40 AM
|
|||
|
|||
|
got started
had some time to work on the v20 the floor was soft around the fishbox so i figured I would have to replace the whole floor and possible stringer repair. The previous owner said he paid someone to replace the whole floor about 5 years ago and they soon went out of bisiness.They did not use marine plywood and inside the fishbox where the plywood floor covers part of the Well it was raw plywood exposed to constant moisture causing it to rot from underneath.
 . I cut back the glass to where it got solid again and opened it up. Based on what i saw I decided to cut the whole deck out.The deck was detached from stringers 1-1/2"drywall screws were used far and few between to hold ply to stringers  .If i'm gonna fix this thing i'm gonna do it once.When The floor was done a new fuel tank was put in and the access panel was eliminated I removed the tank to find that it was foamed in place and the foam was completly saturated under the tank & about 1/3 of the way up.The foam smelled of gas  . There is .50 cents worth of pvc under the tank for transferring water from fore to aft.It had a large crack in it causing water to enter the tank cavity and saturate the foam causing the tank to pit and leak. Conclusion some stringer replacement/repair.Fuel tank,hoses,hardware replacement.Replace deck with marine plywood re glass deck.About $2K and should have a solid boat ready for repower.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
this is my new project 1984 thanks for the welcome pics could be bigger.Iwill get better at this pic thing i hope
Hybrid Mode
