![]() |
|
|
|
#1
|
||||
|
||||
|
see how far out you can slide the platform base( the white plastic part), you may be able to cut a small semi circle in the base to clear the tab. I set a whaler up once like that, it didn't look to bad
|
|
#2
|
||||
|
||||
|
I thought about doin' that...I'll check it out and see where the webbing under the platforms is in relation to where the cut has to be...if it's supported underneath, that might save some Starboard...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#3
|
||||
|
||||
|
Hey Reel
My trim tabs are about inthe same place as yours, this creates alot of turbulance for your transducer (fish finder) and it may not read while underway. Mine won't work. I had to install a thru-hull about 26: fwd and on the stbd side. I already had a hole in the hull there for a water washdown. Yours may work but mine didn't. P/s I wouldn't trade my tabs, I love them.
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson
|
|
#4
|
||||
|
||||
|
Looks good! My scupers were right in the way on mine, but just keep moving till you make them fit.
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#5
|
|||
|
|||
|
Good job on the install REEL.
__________________
*************************************** Stay Safe! Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke. |
|
#6
|
||||
|
||||
|
Thanks guys...I LOVE drillin' holes in my hull...especially below the waterline...
Garage...thanks for the heads up on the transducer...I'll be keepin' an eye on it soon as I can get 'er back in the water... Everything in the pics is dry-fit at this point...gotta get some 4200 for final install...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#7
|
||||
|
||||
|
Nice you old geezer, nicely done
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
![]() |
| Thread Tools | |
| Display Modes | |
|
|