|
|
|
|
#1
|
|||
|
|||
shes alice
Well we took her out on the inland waterways around baytown today and into the bay a bit...pretty funny looking running with no engine cover so we could make adjustments as needed. She backfired a couple of times (pop) but nothing serious and think we got it figured out. The only real issue is that the linkage for going in and out of gear needs some tlc. Other than that she ran (according to the speedo) about 35 top end! Ran her for about an hour and a half with no problems other than the linkage issue. Thanks again for all the help guys.
Also ran into (pun LOL) chum stain on his 20V...sweet ride Rob! Curtis 
|
|
#2
02-09-2009, 12:45 PM
|
||||
|
||||
|
Welcome to the site;
I have a 91 V-20 cuddy and I replaced my 5.7 (cracked block) I bought mine from rapido marine and I'm pleased with the motor. With the old motor and the new one they both would push mine 41-42mph (by gps). Good luck
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson  
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
