|
|
|
|
#1
|
||||
|
||||
Try the Lexan over the Plexiglass and don't go with the metallic stuff.
We had an issue with a bass boat and a tach seeking a ground, that caused a rewire job. To make the story short, when the motor was connected and not the boat power (lights, electronics, etc) it would back feed thru the steering cable and melt the wires.
__________________
 '75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny 
|
|
#2
01-19-2009, 09:08 AM
|
||||
|
||||
|
I used a piece of scrap plywood that I sanded and stained and put about 10-12 coats of varnish on. It was cheap, easy to work with, and looks nice.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
