JohnRudes

[Skools Out]

for your controls to work with out conversion stuff stick with 1996 and newer. If you buy a 150 or 175 like you have then you have a good spare parts motor. try to steer clear of the FICHT motors unless it has had injector upgrades and cmos updates.

[bigshrimpin]

Yeah . . . Stay away from ALL FICHTS.

97 -2001 (150 or 175 FICHTS)

[evilgli]

i always search for deals, but i have runa cross these engines all the time. thought maybe you might be interested.
http://cgi.ebay.com/ebaymotors/2000-...ssoriesQ5fGear


http://cgi.ebay.com/ebaymotors/1999-...ssoriesQ5fGear

[csvencer]

Evilgli,
I have been looking at those, that 2000 looks a little pricey to me. And I don't think that is the right cowling for a 2000.

Found a couple for cheaper, anywhere from 2800-3900 for a 150, so I think that is the route I am going to go.

As for those who bash the VRO I was given this link from the THT, interesting read...

http://continuouswave.com/whaler/reference/VRO.html

-Svence

[csvencer]

Also one other Q. As I look at rebuilt powerheads there is always a break at the 2000 mark, as 1996-2000 150's are this much, and 2001-2004 are this much, whats the deal with that? Are certain years going to burn more gas or be less reliable? I thought they were all pretty much the same.

-Svence

[THEFERMANATOR]

VRO CAN be a good thing, but it is just one more thing to give trouble. Yes the human error is the BIGGEST danger involved in it, as evidenced by what happened to yours. And I am VERY leary of electrical components that have been used around saltwater for years. SYSTEMS that rely on some sort of electrical input concern me ALOT in saltwater useage. To me it is simpler to just pre-mix and know it is there. There are a few systems out there I would trust, the VRO from OMC is NOT one of them.

[bigshrimpin]

Originally Posted by csvencer

Evilgli,

As for those who bash the VRO I was given this link from the THT, interesting read...

http://continuouswave.com/whaler/reference/VRO.html

-Svence

I've read that article before and it's a good article. Oil injection adds lots of potential failure points. An intact properly maintained oil injection system might be very reliable. In reality the oil injection is usually not maintained and is the root cause of MANY MANY MANY engine failures. Why even chance it . . . when you can remove ALL of the potential hazards with 1 action. Simply eliminating the oil injection removes a dozens of potentially catastrophic hazards, the need to perform regular (and sometimes expense) time consuming maintenance procedures and inspections . . . when there is ZERO benefit to keep that "simple" (but not really) system operating properly. So in my uneducated opinion . . . . it seems like a NO BRAINER to yank that POS system off every two stroke CARB outboard and throw it in the trash!!! K.I.S.S. = the best outboard lesson ever taught.

[evilgli]

Originally Posted by csvencer

Evilgli,
I have been looking at those, that 2000 looks a little pricey to me. And I don't think that is the right cowling for a 2000.

Found a couple for cheaper, anywhere from 2800-3900 for a 150, so I think that is the route I am going to go.

As for those who bash the VRO I was given this link from the THT, interesting read...

http://continuouswave.com/whaler/reference/VRO.html

-Svence

i have this article and read it several times. Svence, i still run my VRO system on my 1996 Johnson 150 and have no worries with it. i check my reservoir religiously and when it gets about half way down i fill it up to the top. about twice a month i look over the lines and connections from the reservoir to the engine.

i know alot of people hate the VRO system, and maybe one day i will too, but i like using it now and if it fails, such is life. but i know alot of people local that are using the VRO system and there engines are still running.

i think people are afraid of things they don't understand and repair. so they just remove or don't use it and feel better. but the system works and ALOT of people use it. but like it has been said, your system didn't fail, it worked fine up to the point that it ran out of oil.

[bigshrimpin]

Originally Posted by evilgli

i think people are afraid of things they don't understand and repair. so they just remove or don't use it and feel better. but the system works and ALOT of people use it. but like it has been said, your system didn't fail, it worked fine up to the point that it ran out of oil.

I think that is the underlying statement in the article, which I still believe entirely overlooks the reality that these oil injections are a MAJOR MAJOR cause of engine failure . . . whether or not it "coulda woulda shoulda" been avoided by a knowledgeable educated consumer, who "coulda woulda shoulda" inspected all the connections, failure points, etc and caught the problems with preventative measures. I've seen enough failed oil injection systems (mostly merc and yamaha), not to subscribe to that arm chair article. Oil injection introduces too many potential hazards that can take down even meticulously maintained outboards.

Recently I bought a blown 1997 Carb Merc 200hp. The oil injection screen was covered by a combination of the tin seal from the oil bottle and general crud in the tank. The clogged screen ran the pump dry and the rest is history. This is just one example.

[Skools Out]

Originally Posted by evilgli

i have this article and read it several times. Svence, i still run my VRO system on my 1996 Johnson 150 and have no worries with it. i check my reservoir religiously and when it gets about half way down i fill it up to the top. about twice a month i look over the lines and connections from the reservoir to the engine.

i know alot of people hate the VRO system, and maybe one day i will too, but i like using it now and if it fails, such is life. but i know alot of people local that are using the VRO system and there engines are still running.

i think people are afraid of things they don't understand and repair. so they just remove or don't use it and feel better. but the system works and ALOT of people use it. but like it has been said, your system didn't fail, it worked fine up to the point that it ran out of oil.

You can speak for others but i understand them as do the others that have commented. They are junk in so many ways for one that you and many others using them don't know most likely the VRO on OMC runs off the gray Tach wiring so if the tach misses or is off from your regulator which is a common issue with OMC You loose oil. They are crap as i have had several that the oil injection was off due to the voltage regulator. not new to this as i currently own 6 Johnson 225's , 2 Evinrude 140's and 2 Johnson 140's not to mention the other 10 or so i've had in the past few yrs and sold. The Merc's run a plastic gear on the oil pump which breaks and will still turn slow enough to give no alarm but will run the motor lean on oil so yeah it's death for the merc then. If you run the VRO on any 2 stroke other than the late model Yamaha's then it's only time till you spend money on a rebuild that just premixing would avoid.

this from Lord Skool's