![]() |
|
|
|
#1
|
||||
|
||||
|
Sounds like your ALMOST as broke as I am.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD ![]() AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 |
|
#2
|
||||
|
||||
|
Well I see nothing from the tank to the motor??? I was good, But I will have to wait for help to go any further.
I never did look at that new filter before installing it, I have had on more then one occasion bought auto parts that had shavings from being made in them, I wonder if thats the case with the filter housing? I don't think is anything from the tank to the motor. But fuel pump on I have no idea? We did rebuild the fuel pump with a kit, the only thing that we did not change was the ck vaules? We had all the carbs off, cleaned, and BS checked all the setting I assume? and we put all new gaskets. well I think I am going for another Tuna if the weather holds out on wed.? Sputter or no sputter!!
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#3
|
||||
|
||||
|
O yea. gas tank Galv, and shavings did not stick so must have been stainless or Alum? from were is anyone's guess?
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#4
|
||||
|
||||
|
MJ, not to derail on the fuel issue, do you have steam coming out of the pee hole or water with steam rising off it? i re read some earlier post and noticed you stated steam. are you hi temp sensors working?
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|