WOT Chevy 350 4BM??

[Fishy McGee]

Thanks. I guess it's the older model. Valve cover bolts are on the outside. I was under the impression that the 4bolt main was a higher reving engine. Also, how far from "red line" is "WOT"? They are different right?

[THEFERMANATOR]

WOT is the max RPM's you can reach. Red line on an old style 350 would probably be around 5,000-5,500 RPM's. I would not reccomend runing it there for any length of time though. If it were mine I would prop it to run at 4,300-4,400 max RPM's with a light to moderate load. And most all of the marine engines are 4 bolt main blocks. The marine engines were normally modified truck engines, and most of the heavy truck blocks were 4 bolt main blocks. The real low HP engines would have been 2 bolt main blocks, but most anything over 230HP would be a 4 bolt main.

[Fishy McGee]

Hey man, thanks for the info. 4400 sounds safe to me too, so that's what it'll be. Zephyrhills Fl?? My buddy just moved back here from New Tampa....Beautiful area down there...and no witerizing!
Thanks again

[THEFERMANATOR]

Yep, just north of TAMPA, the big SH!TY. I remember back when TAMPA was just another city, about 25 miles away. Now you can't tell where TAMPA ends and we begin.

[Fishy McGee]

Yea, does seem like one really big suburb down there, but I'm used to that I'm in Northern Virginia/ Metro D.C. one big f'ing cluster f*@k

[spareparts]

for what it maters, Ferm nailed the rpm specs on those motors. I prefered to let them turn a little on the high side of the rpm spec, alot depends on how you run the boat

[Fishy McGee]

Thanks to both of you guys for all the advice. I really appreciate it. My boat usage is probably 70% fishing(a lot of trolling ) and 30% tubeing/skiing. 70% salt/bay/in-shore and 30% fresh lake/river. I got the boat(79') and trailer(2004) for free. I've got about 2k into it including the motor. It's in the shop right now getting new lower shift cables and ball gears(too complicated for my taste) wich is going to be right around another 2k. Structurely the boat is sound, needs some attention on little stuff here and there, but what boat doesn't. I just hope I'm not throwing good money after bad, but 4-5k for a solid V20 with a fresh 350 doesn't sound bad to me.....Am I wrong. It's my first boat so I could be way off base for all I know. Again thanks for all the advice.