|
|
|
|
#1
|
||||
|
||||
That's the one he's talkin about, it helps equalize the steering torque. If it's a right hand rotation it may be turned slightly starboard to help reduce steering pull, if left handed to port.
 Some people want a boat to pull toward a circle when the steering is released, you will have to adjust it to your needs.
__________________
 '75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny 
|
|
#2
08-27-2008, 11:03 PM
|
||||
|
||||
|
You can get the steering zinc at any boat store they all have them.
My 1975 V20 Cuddy 165 I/O used a 17 pitch when I got it, but I liked a 15 1/4 X 15 much better for over all use, got up on plane in just a few seconds.
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#3
08-27-2008, 11:38 PM
|
||||
|
||||
|
that is the one I was talking about. the straight 6 drives used a bigger one than the regular tab, it might be a little harder to find, but go with the big one if you can find it
here it is.... http://www.boatzincs.com/MER34127.html
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
