![]() |
|
|
|
#1
|
||||
|
||||
|
i really want to make sure this bracket will work .. hate to drop $400-$500 to find out that the angle on this bracket will not fit my boat.
macojoe ... R U sure? seems like a fair price based on the prices i got so far. thoughts??? |
|
#2
|
||||
|
||||
|
Initally it looks like a 20' 1985 Fisherman.
#1839 in that series I'm lost as to what the C5 is.
__________________
'75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny Last edited by tsubaki; 05-17-2008 at 08:53 PM. |
|
#3
|
||||
|
||||
|
MJ has bracketed a "75 (I think) cuddy I/O conversion.
If he ain't right, there is a very slim margin of error.
__________________
'75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny |
|
#4
|
||||
|
||||
|
I said it before and I will say it again, it will fit
![]()
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#5
|
|||
|
|||
|
Welcome to the site.
The way I understand it, you can make most any bracket work, but if the angles are different, you will have to do a fair amount of measuring and figuring to get the bracket mounted at the correct height. I've seen brackets several hundred less than the asking price on that one, although it does looks new. Don't get in too big of a hurry, there are many fish in the sea Grasshoppah.
__________________
*************************************** Stay Safe! Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke. |
|
#6
|
|||
|
|||
|
About how much do the ones with the platform cost? My catamaran has one and I really like it for ease of climbing into the boat. Mine's got a kicker bracket one one side and a ladder on the other. I've even seen one with an ice chest mount on one side. I think its made by stainless marine but its aluminum.
|
|
#7
|
||||
|
||||
|
I have a Stainless marine on my V20 New like hew one shown for $900+ and the full swim board $2100
I have a Armstrong just like the one shown in the pic now of my Sea Ox. If the one on ebay goes for $500 that will be a great deal for a new one!! I got mine as a take off from a local mariner, the guy swapped from a single motor to a twin set up, I got it at the time for $400 The transoms on the V20 is 15* but 12 will be fine!! Mine was a 12 also on the V20, thats what you have power tilt for.
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
![]() |
| Thread Tools | |
| Display Modes | |
|
|