Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > General

Reply
 
Thread Tools Display Modes
  #1  
Unread 05-16-2008, 11:43 PM
cfelton cfelton is offline
God
 
Join Date: Dec 2006
Location: Hobbsville, North Carolina
Posts: 1,364
Default

Thanks Spare, I've got a Mercarb on it now. I rebuilt it before I put it on and it runs really good. The original carb is a rochester with the 2 jets at the bottom of the barrels. I put a kit in it but the jet screws were broken off flush with the carb base. It ran ok but leaked a little gas into the throat after I cut it off. I removed the retaining tab,spring and ckeck ball and cleaned it well. After replacing all the leak stopped, but with the jets broken off I couldnt make any adjustments on the high speed side. Ill try and get those broken jets out and replace them and maybe try it again. Thanks again!!
__________________


77 V20 cuddy with 170 I/O Mercruiser
72 16ft. Carolina w/a 25hp Evinrude
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:19 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.