|
|
|
|
#1
|
||||
|
||||
When he gets the new axle make sure he gets the same size, they measure them so many different ways!
Over all leanth, axle not including the spindles, and spring mounts, bring the old one with you if possible. Or ask the guy were you are buying how to measure.
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!! 
|
|
#2
05-12-2008, 08:23 PM
|
||||
|
||||
 For the most part you can't true one. They are made certain lengths, widths, cambers for given trailer needs. There should be a divit or hole about 5/16" round for the spring bolt to rest in, in the axle. Biggest thing (besides getting the correct length) I would be concerned with is that the axles have the same size bearings. Like MJ says, spring center to center measurements have started being the standard, but spindle lengths can still be different, especially on the real heavy duty axles and some list hub face dimensions.
__________________
 '75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny
|
|
#3
05-14-2008, 08:44 PM
|
|||
|
|||
|
nothing to true up it fits in pegs
__________________
love to fish
|
|
#4
05-16-2008, 11:08 PM
|
|||
|
|||
|
measure up spring centers, hub face to hub face, axle tube size and bearing size. those are all the measurements you should need.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
