|
|
|
|
#1
|
|||
|
|||
LumberSlinger had his hull "soda blasted". And you see how nice his is now.
__________________
*************************************** Stay Safe!  Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke. 
|
|
#2
05-05-2008, 12:46 PM
|
||||
|
||||
|
If you can pay someone, that's the way to go - it's a $hitty job to do for sure. Here's mine as I started at the bow, stripping and wiping down. I used the BIX in the orange can, as it stated OK for fiberglass - no ill effects. Would it hurt the gelcoat sitting on it over a long period of time? - I cannot say. Worked well for me and that's all I can attest to. Took the old boot stripe right off also. The hull will be stained from the previous paint still, but since you'll paint it no problem, or sand clean. This stuff worked FAR better than the WAY more expensive 'marine store' stripper.
Again, if you can get someone else to do it, so much the better. Might be some better pics in my gallery on pg5 (don't remember).  
__________________
Pete 82 V-20 Merc 898 I/O 305ci V8 (gallery pg 5)
|
|
#5
05-08-2008, 08:58 PM
|
|||
|
|||
|
drj, thanks for asking that question. Iv gotta do the same thing and was wondering about chemical strippers. I think I'll try that BIX also! It sounds alot faster and easier thad a 5in random orbital sander!!
__________________
 77 V20 cuddy with 170 I/O Mercruiser 72 16ft. Carolina w/a 25hp Evinrude
|
|
#6
05-08-2008, 10:18 PM
|
||||
|
||||
|
Guys, do a search on the forum and you'll find plenty of posts to give you plenty of options...
__________________
 1990 Hydrasports 2000cc Vector with 96 200HP Oceanrunner. Saved by grace alone, through faith alone, in Christ alone http://www.providencerpchurch.com/
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
