|
|
|
|
#1
|
||||
|
||||
ok got a heat gun and got the small pin striping off, haven't tried the large striping at the water line.
Got my teak off and washed and scrubed and sanded, steel wooled it. It's ready for the oil application, will do that tomorrow. filled the holes with f-27 and sanded.
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson  
|
|
#3
05-05-2008, 04:34 PM
|
||||
|
||||
|
Quote:
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson
|
|
#4
05-05-2008, 06:39 PM
|
||||
|
||||
|
I took off the teak and cleaner and got 3 coats of teak oil on them. I'll check them tomorrow and see if they are dry.
Should I put additional coats on them until they will not soak up any more of the oil?
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!! 1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
