Plywood?

[Stinky_Hooker]

In my younger days I done a whole floor in a small boat in PT.....I was NOT happy about a month later...



Ive used regular sanded pine every since....never had a problem..

[bigshrimpin]

I've use doug fir marine plywood a/b. It's about $50 for a sheet of 1/2 and $65 for a sheet of 3/4. Also if you can find MDO (what's used for billboard signs) that is a little less and very good quality usually no voids (comes with 1 or two paper faces).

Sometimes you can find a sign supply shop that will sell you old bill boards for $10 a sheet 4/8 3/4" MDO. I bought 15 sheets from a place at $5 each to do shelves for a friends garage.

[lumberslinger178]

Originally Posted by bigshrimpin

I've use doug fir marine plywood a/b. It's about $50 for a sheet of 1/2 and $65 for a sheet of 3/4. Also if you can find MDO (what's used for billboard signs) that is a little less and very good quality usually no voids (comes with 1 or two paper faces).

Sometimes you can find a sign supply shop that will sell you old bill boards for $10 a sheet 4/8 3/4" MDO. I bought 15 sheets from a place at $5 each to do shelves for a friends garage.

Yes nice stuff at the lumber yard I deal with we call it dura ply , the even sell a mahogany veenere plwood , the guys that do the fiberglass decks and roofs love this stuff 1/2 inch for like 23.00 a sheet

[lumberslinger178]

[THEFERMANATOR]

Well i checked with LOWES today, and there lumber looked HORRIBLE! Even there cabinet grade plywood had knots in it. So I ended up going to HOME DEPOT and got a sheet of 3/4" sanded ply and had them cut it to size for me on there big saw. For $38 I got a nice piece of ply with NO knots in it, and had it cut to size as well. Hopefully it works out. I'll start another post with progress pics.

[lumberslinger178]

ferm not just a few pics ....... lots there brother

[jasoncooperpcola]

we used treated plywood for our 250 Sportsman deck lamination.