Vro

[Skools Out]

thanks MJ and yes it says 14* BTC so most liekly a XP motor wow

[THEFERMANATOR]

Originally Posted by Skools Out

thanks MJ and yes it says 14* BTC so most liekly a XP motor wow

I'm using one of them there old crappy CRT monitors, so I can't make out that many details in pictures. But a true XP is a rarety anymore. I had a chance to buy 2 of them one time, but it was before I knew what they were. If I still could get them now, he only wanted $700 for 2 complete engines. One of them needed 2 pistons, and the other ran.

[Skools Out]

i have 2 sets of XP carbs. they have hugh throats on them suckers.

[Slightly_Twisted]

wow thanks guys.
I guess this opens a whole new door. My question now is one how do I protect it (what should I be looking for problems wise).

Then what should I do about the VRO. I've tried to read an much on them as I can, and I think I understand what they are all about. Not knowing the history of the motor I just want to make sure everything is working right.

I've done the lower gear oil
rebuilt the carbs
changed the impeller
starting silanoid

I was thinking of ordering new thermos

anything else?

I know boats enough to get by (sailed all my life), but not motors

Thanks a lot.

[THEFERMANATOR]

Being an 86 it may need the updated T-stats in it. Ditch the VRO and cap the oil inlet off with the OMC cap, and pre-mix it 50:1. It'll be a little smoky at idle, but the mosquitos will hate you. Also make sure that the valve on the throttle linkage that has lines hooked to it is good and leaking. T-stats and that valve play a HUGE part in how well these engines idle, or how HORRIBLE some of them can idle. Most people overlook this area for engine performance concerns.

[Slightly_Twisted]

THANKS!!!
I was looking online and found these? I just want to double check the part numbers and if you guys know of a cheaper place before I order them.

http://www.dixiemarinesales.com/detail.aspx?ID=55





I can't thank you guys enough.
Any time your in Maine beers and fishing on me

[tsubaki]

If your going to the trouble to change the thermostats, might as well change the temperature (overheat) sensors.


replacing it and t-stats.