racor filters on Ebay

[whale]

Originally Posted by macojoe

I just ordered 2 one for me and one for CB!

Did you try $17? Looks like on that other site guys say they offered $17 and it was accepted.

[macojoe]

At that price I just payed!! they like $80 here when I was looking last year.

[Slightly_Twisted]

did anyone find out the size? I think I might just grab one too!!!

[macojoe]

Says they are for inboards, But I am using my I/O on my outboard with no problems.



Rated for 30 GPH

Racor 120RRAC01 Gasoline Spin-On Series Fuel Filter/Water Separators Gallons per hour- 30
Port size- 1/4-18
Bowl- See-Thru
Cost: $55.92

Racor 120RRAC01 Gasoline Spin-On Series Fuel Filter/Water Separators Replacement Element Number S3240

Racor S3240 Gasoline Spin-On Fuel Filter Elements Application- Inboard
Fuel Type- Gasoline

Fits Model Numbers-120R-RAC01
Cost: $13.97

[Slightly_Twisted]

thanks MJ your still the man

[whale]

Originally Posted by macojoe

Says they are for inboards, But I am using my I/O on my outboard with no problems.



Rated for 30 GPH

Racor 120RRAC01 Gasoline Spin-On Series Fuel Filter/Water Separators Gallons per hour- 30
Port size- 1/4-18
Bowl- See-Thru
Cost: $55.92

Racor 120RRAC01 Gasoline Spin-On Series Fuel Filter/Water Separators Replacement Element Number S3240

Racor S3240 Gasoline Spin-On Fuel Filter Elements Application- Inboard
Fuel Type- Gasoline

Fits Model Numbers-120R-RAC01
Cost: $13.97

MJ, I have been digging around also and the ones for inboards appear to end in 02 ie 12R-RAC-02 vs 120R-RAC-01.....the difference appears to be only the clear bowl on 01 is not approved for inboards by the CG...02 has a metal bowl. Here is a link to a tech manual.

http://www.a-filter.se/files/racor_products.pdf

My question is about the maximum gph.....the manual says the 120R is for "smaller" gasoline engines up to 30 gph.

There is also a guy selling a couple of bigger ones on Ebay if anyone is interested....

http://cgi.ebay.com/ebaymotors/RACOR...spagenameZWDVW

[spareparts]

those are a bit small for big v6 OB. I just use the standard Mercury/Sierra/GLM/Yamaha/AquaPower type filter head, then use the Racor element on it. Those filter heads will handle just aboout anything you hook to it.Right now the Yamaha factory filter is specced at 10 microns, and its atleast 10" long

[macojoe]

Keep your hand off the throttle and you be fine!!