![]() |
|
|
|
#1
|
||||
|
||||
|
Scoot it (the boat) out with the garden hose, remove the plug, wick the bilge out or dry with a wrag then start looking for accumilations of fuel in the bilge.
Most likely, you can repair it but this will involve removing the tank. If it is leaking replacing it will be inevitable but a patch might buy you some time.
__________________
'75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny Last edited by tsubaki; 03-18-2008 at 12:52 PM. |
|
#2
|
||||
|
||||
|
Like said above clean and dry the bilge and then look for signs of a leak?? If you find nothing then you could get the tank pressure tested to find out for sure.
If you have to take it out, its not going to be fun!! Lots of work and a new 60 gal tank will be $500+ so if you don't have a need for 60 gal you might want to ck out the 40 gal thats a nice price!!!!!
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#3
|
||||
|
||||
|
CAREFUL about the pressure test. Usually 3-5 psi is all the pressure added to check for a good tank.
__________________
'75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny |
![]() |
| Thread Tools | |
| Display Modes | |
|
|