|
|
|
|
#1
|
|||
|
|||
If you put some reinforcement on the underside it should be ok. But I would think it would be slick as boiled okra when its wet.
__________________
*************************************** Stay Safe!  Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke. 
|
|
#2
02-14-2008, 10:14 AM
|
||||
|
||||
Quote:
i agree.....I would rebuild it rather than starboard...not to mention the cost of 3/4" starboard that size...WHOA!!!!
|
|
#3
02-14-2008, 10:28 AM
|
|||
|
|||
|
I was worried about it being slick, I was thinking the non-skid Seaboard would be a better option. If I recore the current cover I will have to grind out the spidercracks and repaint it, I would like to avoid painting the deck. Besides, my fiberglass skills are non-existent. I figured the "seafoam" color seaboard would be a close match to the existing color deck and I can use it the left over material for the small hatch in front of the tank.
|
|
#4
02-14-2008, 10:35 AM
|
||||
|
||||
|
Thats good thinking...i havent had expierence with the textured stuff...I hear its more slip resistant but not sure about when its wet...anybody here used it?
|
|
#5
02-14-2008, 01:36 PM
|
||||
|
||||
|
3/4 will need no bracing! That stuff strong!!
And yes get the textured stuff, I did not find the 3 hatch covers in the floor to be slippery, but they were smaller then the hole middle of the floor. Now Up here were I am we have a place that sells Sea Board, same stuff!! Cheaper. and more colors. I have no idea what they charge or were you can find it in your area?? But maybe they can tell you if you call them?? They are at http://www.jfreeman.com/cpg_seaboard.html
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#6
02-14-2008, 01:39 PM
|
||||
|
||||
|
I see you are in PA. I did a quick search and found this place:
Compression Polymers Corp. and Vycom Corp. 801 Corey Street Scranton, PA 18505 [email protected] ph: 1.800.235.8320 fax: 570.346.4122 It says they have Seaboard?? http://www.cpg-vycom.com/seaboard_light.asp
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
|
#7
02-14-2008, 02:39 PM
|
|||
|
|||
|
Thanks for the info MJ. the deck on my V-20 is not non-skid and I can tell you when it gets wet its like ice. The Seaboard I have seen has a grain to it which seems like it would provide some traction. the problem with the special non-skid seaboard is its only available in grey or polar white and won't match the current deck.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
