250 Sportsman questions

[macojoe]

Decals, ck ebay if not you might have to have them made?

Water, thats anyones guess??

Rod holder for 20 rods, bring less rods! Put the boat rods and bait rods in the cuddy and leave the surf rodshome, your on a boat

Did I say surf fish don't count!:p

[jasoncooperpcola]

When your boats name is "Reel Poor" going out with five rods looks bad. But not when you got them all, especially with two Penn 80's on the transom!

[jasoncooperpcola]

Here's a picture of the decals i need.

[THEFERMANATOR]

I know that I've worked on a couple of 248/250's, and the fiberglass seams under the water tank seem to be a trouble area with delamination. Water seems to come in from the anchor area and runs down in. As MJ said, watch Ebay for decals. As for the rod racks, we always just kept them on one of the quarter births when not in use.

[jasoncooperpcola]

Thanks, Ferm. We pulled the water tank out and are planning to use that area for our anchor rode storage. We are planning to put a hawse pipe for the rope to go through. Does anybody have any recomendations for an anchor roller. Wherever i mount the anchor roller its gonna have to be strong enough to break an anchor loose. I'll try to take a picture of the bow area of the 250 tomorrow. This is a picture of our curretn setup on our V20.

[macojoe]

I had a roller like shown in the picture, and was fine, once in a while the anchor would get stuck and you had to give it a little push.

Hamer and irslot bought tilting rollers, so when you undid the rope the weightof the anchor would tilt it down to the water and off she go real easy!!
If I decide to add one to thenewboat I will use a tilting roller.

[phatdaddy]

Jason, you should be able to go to a local sign shop with a pic of the decals & they could reproduce them for you. if you can get a pic with a ruler in it. that will help.