![]() |
|
|
|
#1
|
|||
|
|||
|
spare parts sounds like the man for sure, and don't be surprised if I try to take up the offer. To be honest this sounds like a problem any of you guys could fix in a couple hours! I'll keep you all posted as things progress. Waiting for the snow to melt for now, but hey its raining so at least I wont be ice fishing! Got to love Michigan winters
|
|
#2
|
||||
|
||||
|
I'll make it a little more tempting, its 75 and sunny here right now, and just the other day, I caught 8 trout from the dock, kept 5, big fish was 24", 3 released at 13 1/2 ( 14 inch minimum on specs here in SC). "Nothing could be finer than to live in Carolina"
|
|
#3
|
|||
|
|||
|
sweet:
i had the same problem and ended up changing the engine to a v6 4.3, uses the same multiplication in the outdrive. however you can: - take end the caps off the heat exchanger and clean the lines with a thin wire brush. - check the raisers gaskets and make sure they are metal with close passage paper gaskets - check the timing, the 470 is very sensitive if off timing just a little bit. - make sure all hoses are straigth and disconect the hose that comes from the outdrive and make sure the drive's impeller is sending water out. - replace radiator cap good luck with that engine.!!! Lesterus |
![]() |
| Thread Tools | |
| Display Modes | |
|
|