Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > General

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #23  
Unread 06-14-2007, 09:41 AM
phatdaddy's Avatar
phatdaddy phatdaddy is offline
God
 
Join Date: Mar 2003
Location: south of I-10
Posts: 4,965
Default Re: Had the shake down cruise Saturday........

RAP, not sure of the measurement you need, the platform is 15" deep and the ladder is 15" deep when folded, but it hangs over the edge 1.5"s.

Gator, i used some large fender washers. if i were to doit again, i would rather use some large pieces of teak and get longer bolts.

The drawbacks to this ladder is they are kinda narrow(you can see where the old one step was bolted on) and when boading with fins, you have to take them off. Also when you are achored in shallow water and the step is down, it will dig in the sand when the boat rocks and weaken the platform. that is why i have the velcro strap, to hold it together when not needed.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:24 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.