Transoms outer skin has been removed

Have attempted seven times to get set up with Photobucket; rejected each time because of their code. Have Kodak Easy Share. Would be glad to E-mail the pictures to someone and they post them.
As for the gunnels. Using a sawsall cut the fiberglass/gelcoat and the outer skin slipped out. The plywood only goes up about an inch under the gunnel.
To put a curve in the plywood to match the transom curve, I will place the ends of the plywood about 6 inches off the ground and put a log in the center. I believe, after afew days I will have a curve set in the plywood. Just like standing it up against a wall.