Trailer Mods

[LESTERUS]

BOSTICK ANTI-SEIZE IN COOPER OR NICKEL IS VERY GOOD, WE DID A TEST WITH A 3/4 INCH BOLT ONCE FOR BOSTICK, WE COATED JUST A LITTLE IN THE MIDDLE OF THE BOLT AND PUT A NUT, THEN WE HANGED THE BOLT AND NUT IN CONTACT WITH SALT WATER ONLY WHEN
HIGH TIDE, THAT WAY THE BOLT WAS UNDER WATER FOR A FEW HOURS AND OUT IN THE AIR FOR ANOTHER FEW HOURS (MAX RUST CONDITIONS) AFTER SIX MONTHS THE PART NOT COVERED WAS BEYOND RECOGNITION WHILE IN THE PART COATED YOU COULD TURN THE NUT BY HAND.

NOTE: DO NOT USE NEVER-SEEZ IN THE OUTDRIVE/PLATE BOLTS, YOU NEED CONDUCTIVITY THERE.

AS FOR YOUR HUBS, DEPENDING ON THE SIZE OF YOUR BEARINGS THERE ARE SOME GALVANIZED HUBS IN THE MARKET, SEALS BUY @ BEARINGBUDDY.COM

LESTERUS