The Final Chapter!!

[macojoe]

Well CB showed up today at 8:30 am!!

I got the new fittings it needed and we installed all. There were lots of missing little things??

We worked on all the problem spots, and got it so that we could take it to the water.

Well after the first trip to the water is was still in need of adjustments. Still Idled low and not getting full throttle? After a few minutes of running at 4000 RPM it would slow down and not go over 2500 rpms??

We brought it home change the plugs for the right plugs and gaped to right spec.
The plugs that were in it were the wrong ones and gaped at .025, when they call for .040!

Then it ran much better and we headed to the water, ran real well at first then the same thing happened, would lose rpm's and then it would race up all by it self??

Then the alarm went off and it was heating up and started shaking??

we shut it down let it cool and came back at 700 RPM's all the way.

Took to a Mechanic I know, and he told us he can't be sure but that he thought the motor has real issues internally!! And that in his opion its not worth fixing, cause it is going to need a total rebuild!!

I am all done.