Like Pipe says, pretty easy fix. Pull tank cover, flip it over on some saw horses and remove all of the old core material. Usually pretty delaminated anyway. Right angle grinder with a corse grit flap disc is your best friend for this. I used a piece of 1/2 marine ply for my core. Wellcraft used Balsa ply squares. Make sure u bevel the edges of the ply so the cloth will lay smooth over the edges.
Good thing about this is your glass work is all hidden, so pretty not important. I like epoxy over polyester, more predicable in Florida heat.
|
06-20-2024, 08:34 PM
Threaded Mode