|
|
#2
06-11-2018, 10:54 PM
|
||||
|
||||
Sounds like you have a well thought out plan in place. Just a slight piece of advice. Look carefully at the inside of the transom where the set back "bubble" it comes through the transom. See that 1" gap on either side? My advice is to fill it and then glass over it to either side of the stringers back there for much needed and added strength. The general consensus of thought is that the reason these hulls are only rated for 200 HP outboards is that the original construction of the way the bubble is attached through the transom made it unwise to rate the hull for a higher HP engine. Just my 2 cents, but that's what I did with my 96 V21 when I had the deck off it.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless. 
|
|
|
Threaded Mode